Measuring instruments for pressure and temperature are used in almost all areas of industrial manufacturing. As Love of continuous mechanical, chemical and thermal loading, these instruments age and will therefore not guarantee the correctness of the measured values during the period of time. Through timely calibration, however, the alteration of the measured value can be determined.
In Lost of calibration, the displayed value of the measuring instrument is compared with the measuring result of a different measuring device which is known to function correctly and accurately and which itself has been designed to coincide directly or indirectly with a national (or international) reference instrument. In a nutshell, to be able to compare measuring results, they need to be ?traceable? to a national or international standard via a chain of comparative measurements. The calibration hierarchy shown in the picture (using the exemplory case of Germany) depicts the traceability of an inspection equipment in an organization up to national standard at the PTB (German national metrology institute).
In order to ensure traceability used, the following points must be observed, amongst others:
The chain of comparison should not be interrupted.
The measurement uncertainty should be known in each stage of the calibration chain so the total measurement uncertainty can be calculated. Generally, a superordinate measuring instrument should have a measurement accuracy 3 to 4 times higher.
Each step in the calibration chain must be documented, including the measurement results.
All bodies conducting a stage in the chain must prove their competence by way of accreditation.
Calibrations must be repeated at appropriate intervals. The periods depend on the demanded measurement accuracy and the technical requirements
Note
The WIKA calibration laboratory is accredited by the German Accreditation Body (Deutsche Akkreditierungsstelle ? DAkkS) relative to DIN EN ISO / IEC 17025 for the measurands temperature, pressure, DC current, DC voltage and DC resistance. More info on our calibration laboratory or an on-site calibration with the WIKA calibration van are available on the WIKA website. If you are thinking about our services, please feel free to contact us via e-mail.
Know more about the differences between factory calibration and traceable calibration in the following video: